AMX Rack Rail Kit MMS Servers Guida di Configurazione Scaricare il pdf (Pagina 46)

Chapter 5 Installing the Network Routing Switch

Installing the FastIron Switch

To install the FastIron switch:

1. Unpack the switch and its mounting hardware.

2. Attach the mounting brackets to each side of the front of the switch,

using the screws supplied with the switch.

3. Slide the switch into the rack and locate it at the bottom of a

U-alignment space.

4. Attach the switch to the rack rails, using the screws supplied with the

switch.

Connecting a Media Server to the FastIron Switch

To connect a Media Server to the network routing switch:

1. Locate an Ethernet cable in the Media Server kit. This cable can be

either a standard 10/100BASE-T Category 5 cable with RJ-45

connectors on the ends or an optical cable for gigabit (1000BASE-T)

Ethernet. Check the Ethernet adapter board in the top slot on the back

of the Media Server to determine the type of cable you need.

2. Connect one end of the cable to the Ethernet adapter board.

3. Connect the other end of the cable to the network routing switch.

0550201A_BK.book Page 46 Thursday, January 9, 2003 10:44 AM

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 57 58

Nessun commento

AMX Rack Rail Kit MMS Servers Guida di Configurazione Pagina 46