AMX EXB-COM2 Specifiche Pagina 45
- Pagina / 70
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
NetLinx Send Commands
37
ICSLan Device Control Boxes
NetLinx Send Commands
The following NetLinx SEND_COMMANDs are supported by the EXB-xxx modules.
NetLinx Send Commands
Command Description EXB Modules
B9MOFF Set the port's communication parameters for stop and data bits
according to the software settings on the RS-232 port (default).
• Disables 9-bit in 232/422/455 mode.
• By default, this returns the Communication settings on the serial port
to the last programmed parameters.
• This command works in conjunction with the 'B9MON' command.
Syntax:
B9MOFF
Example:
SEND_COMMAND SOMEDEVICE_1,"'B9MOFF'"
Sets the port settings on SOMEDEVICE to match the port's
configuration settings.
• EXB-COM2
• EXB-MP1
B9MON Override and set the current communication settings and parameters
on the RS-232 serial port to 9 data bits with one stop bit.
• Enables 9-bit in 232/422/485 mode.
• This command works in conjunction with the 'B9MOFF' command.
Syntax:
B9MON
Example:
SEND_COMMAND SOMEDEVICE_1,"'B9MON'"
Resets the SOMEDEVICE port's communication parameters to nine
data bits and one stop bit.
• EXB-COM2
• EXB-MP1
CAROFF Disable the IR carrier signal until a 'CARON' command is received.
Syntax:
CAROFF
Example:
SEND_COMMAND IR_1,"'CAROFF'"
Stops transmitting IR carrier signals to the IR_1 port.
• EXB-IRS4
• EXB-MP1
CARON Enable the IR carrier signals (default).
Syntax:
CARON
Example:
SEND_COMMAND IR_1,"'CARON'"
Starts transmitting IR carrier signals to the IR_1 port.
• EXB-IRS4
• EXB-MP1
- ICSLan Device Control Boxes 1
- Table of Contents 3
- Common Features 10
- LAN/PoE Port 11
- Detailed LED Behavior 12
- Installation 13
- ICSLan Device Control Boxes 14
- FIG. 4 AVB-VSTYLE-POLE-MNT 14
- SAFETY INSTRUCTIONS 15
- Network Configuration 17
- Master Connection Modes 18
- Factory Default Parameters 19
- Device IDs 20
- Using the ID Pushbutton 20
- ID Pushbutton Location 21
- Performing a Factory Reset 22
- Programming the EXB Modules 23
- EXB-COM2 25
- Connections and Wiring 26
- NetLinx Programming 27
- EXB-I/O8 29
- EXB-I/O8 SEND_COMMANDs 31
- Telnet commands 31
- EXB-IRS4 33
- Input Port Bank 34
- Input Linking 35
- Linked Modes 36
- EXB-IRS4 SEND_COMMANDs 38
- Overview 39
- Port 3 (IR-TX/Serial) 41
- Port 4 (IR-RX) 41
- EXB-REL8 43
- NetLinx Send Commands 45
- NetLinx Send Commands (Cont.) 46
- SEND_STRING Escape Sequences 59
- Terminal (Telnet) Commands 61
- Telnet Commands 62
- Terminal Commands (Cont.) 63
- Windows Client Programs 67
- Linux Telnet Client 68
- Increase Your Revenue 70
Prodotti e manuali riguardandi Gateway/Controller AMX EXB-COM2
Gateway/Controller AMX NXV-300 Specifiche
(80 pagine)
(80 pagine)
Gateway/Controller AMX NI-3100 Specifiche
(160 pagine)
(160 pagine)
Gateway/Controller AMX NXB-CCG Specifiche
(40 pagine)
(40 pagine)
Gateway/Controller AMX NXB-CCG-K Specifiche
(32 pagine)
(32 pagine)
Bosch LTC-2915-91 manuály
Uživatelské manuály a uživatelské příručky pro Televizory a monitory Bosch LTC-2915-91.
Poskytujeme 1 manuály pdf Bosch LTC-2915-91 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Commenti su questo manuale