AMX NXD-1700VG Manuale Utente Scaricare il pdf

Quick Start Guide

NXD & NXT-1700VG

Multimedia Touch Panel (G4)

For more detailed installation, configuration, programming, file transfer, and

operating instructions, refer to the VG-Series Modero Touch Panels Instruction

Manual available on-line at www.amx.com.

ATTENTION!

Verify you are using the latest NetLinx Master and Modero touch panel firmware

(available from www.amx.com). Verify the TPDesign4 program being used is

Version 2.6 or higher.

Overview

The VG-Series of touch panels can be fitted for either Video (Composite) or RGB

(Component) via the use of two kit configurations: Video Kit and RGB Kit. Each

kit comes with its own group of standard components that are specific to its

configuration. The following table outlines the different configurations available

for 1700VG panels:

Specifications

FIG. 1 Wall Mount and Table Top 1700VG Touch Panels

Modero 1700VG Multimedia Touch Panels

With Video Kit

NXD-1700VG (FG2256-61V) 17" Modero Multimedia WallMount Panel with Video Kit.

NXT-1700VG (FG2257-61V) 17" Modero Multimedia Table Top Panel with Video Kit.

With RGB Kit

NXD-1700VG (FG2256-61RGB) 17" Modero Multimedia WallMount Panel with RGB Kit.

NXT-1700VG (FG2257-61RGB) 17" Modero Multimedia Table Top Panel with RGB Kit.

1700VG Specifications

Dimensions (HWD): • NXD-1700VG (with faceplate): 14.44" x 18.09" x 3.31"

(36.68 cm x 45.95 cm x 8.41 cm)

• NXT-1700VG (Fully raised): 13.29" x 17.84" x 12.44"

(35.31 cm x 45.31 cm x 31.60 cm)

• NXT-1700VG (Fully lowered): 6.23" x 17.84" x 12.44"

(15.82 cm x 45.31 cm x 31.60 cm)

• CB-TP17 (conduit/wallbox): 13.55" x 17.07" x 3.49"

(34.43 cm x 43.38 cm x 8.85 cm)

• MB-TP17 (VESA mounting box): 14.44" x 18.09" x 3.48"

(36.68 cm x 45.95 cm x 8.84 cm)

Power: • Constant current draw: 4.5 A @ 12 VDC (stand-alone)

• Startup current draw: 6.5 A @ 12 VDC (stand-alone)

Minimum power

supply required:

• PSN6.5 Power Supply (FG423-41)

- using accessories can increase the power draw requirements

Memory: • 256 MB on-board memory

• 128 MB Compact Flash (upgradeable to 1 GB factory programmed)

Weight: • NXD-1700VG: 18.20 lbs (8.26 kg)

• NXT-1700VG: 22.00 lbs (9.98 kg)

LCD Parameters: • Aspect Ratio: 16 x 9

• Brightness: 450 cd/m2

• Channel transparency: 8-bit Alpha channel transparency

• Contrast ratio: 600:1

• Display colors: 16 million colors (24-bit color depth)

• Dot/pixel pitch: 0.289 mm

• Screen resolution (HV): 1280 x 768 pixels

• Video formats: NTSC, PAL, and SECAM (shown within variable-size

video windows)

Viewing Angles: • Vertical: + 85° (up from center) and - 85° (down from center)

Supported Audio

Sample Rates:

• 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz,

12000Hz, 11025Hz, and 8000Hz.

Certifications: • FCC Part 15 Class B, CE, and EN 60950

NXD-1700VG

NXT-1700VG

(Wall Mount)

(Table Top)

1700VG Specifications (Cont.)

Supported Transport

Protocols:

• RTP (MPEG-2/MPEG-4 Transport Stream)

• UDP (MPEG-2 Transport Stream)

Supported Audio

Codecs:

• Advanced Audio Coding (AAC)

• MPEG Audio Level 2 (MP2)

• MPEG Audio Level 3 (MP3)

Supported Video

Codecs:

• MPEG-2

• MPEG-4

Front Panel

Components:

• Light Sensor: Photosensitive light detector for automatic adjustment of

the panel brightness

• Motion Sensor (PIR): Proximity Infrared Detector to wake the panel

when panel is approached

• Front Setup Access Button: Pushbutton (grey) used to either put the

panel into a "sleep" or "wake" state

• Microphone: Used for intercom applications

• Speakers: Stereo output with a frequency response of 450 Hz - 7 KHz

Rear Panel

Components:

• RGB Connector: Made available only by using an NXA-RGB interface

card installed within the touch panel. Used with Component/RGB

signals

• Audio/Video Connector: RJ-45 connector for communication of

differential audio/video signals

• Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication

• PWR Connector: 2-pin 3.5 mm mini-Phoenix connector

• Stereo Output Connector: Stereo output through a 3.5mm mini-jack

• USB Connector: Two Type A USB ports

• Mini-USB Connector: 5-pin Mini-USB connector

Operating / Storage

Environments:

• Operating Temperature: 10° C (50° F) to 40° C (104° F)

• Operating Humidity: 20% to 85% RH

• Storage Temperature: -20° C (-4° F) to 60° C (140° F)

• Storage Humidity: 5% to 85% RH

Included

Accessories:

• Installation Kit for 12" and 17" NXD panels (KA2251-01):

- 2-pin mini-Phoenix connector (41-5025)

- Four Drywall clips (62-5924-05) and #6 - sheet metal screws

- One CAT5 Suppression Ferrites (04-0014)

- Three Phillips-head screws (#4-20 x 0.250 Black)

• Installation Kit for 15" and 17" NXT panels (KA2251-04):

- 2-pin mini-Phoenix connector (41-5025)

- One CAT5 Suppression Ferrites (04-0014)

- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)

• Included within the RGB Kit (FGxxxx-xxRGB) is the following:

- Modero VG Touch Panel (NXD/NXT-1200/1500/1700VG)

- NXA-AVB/RGB Breakout Box (FG2254-11)

- NXA-RGB internal RGB/VGA Interface Card (FG2260)

- NXA-RGBCBL, 15-pin to 5X BNC RGB Breakout cable (FG2250-80)

- NXA-MTC/RGB Modero 10’ foot Table Top Cable

(with RGB connector) (CA2250-70)

• Included within the Video Kit (FGxxxx-xV) is the following:

- Modero VG Touch Panel (NXD/NXT-1200/1500/1700VG)

- Modero 10’ foot Table Top Cable (CA2250-50)

- NXA-AVB/ETHERNET Breakout Box (FG2254-10)

Other AMX

Equipment:

• CB-TP17 Conduit/Wallbox (FG034-10)

• CC-USB (Type A) to Mini-B 5-Wire programming cable (FG10-5965)

• Kensington Lock Bracket (FG2259-10) (optional only with NXTs)

• MAX-CSE MAX Video Encoder (FG2178-70)

• MB-TP17 Universal VESA Mounting Box (FG033-50)

• NXA-AVB/ETHERNET Breakout Box (FG2254-10)

• NXA-AVB/RGB Breakout Box (FG2254-11)

• NXA-BASE/B (FG2255)

• NXA-MTC/RGB Modero 10’ foot Table Top Cable (with RGB

connector) (CA2250-70). This cable is not wall-rated for NXD models.

• NXA-PCI80211G Wireless Card (FG2255-04)

• NXA-RGBKIT RGB upgrade kit for Composite Video touch panels

(FG2255-11):

- NXA-AVB/RGB Breakout Box (FG2254-11)

- NXA-MTC/RGB Modero 10’ foot Table Top Cable

(with RGB connector) (CA2250-70)

- NXA-RGB internal RGB/VGA Interface Card (FG2260)

- NXA-RGBCBL, 15-pin to 5X BNC RGB Breakout cable (FG2250-80)

- NXT Table Top replacement I/O plate (with RGB connector opening)

(62-2250-59)

- NXD WallMount replacement adhesive overlay for existing I/O plate

(53-2250-03)

Note: The NXT replacement I/O plate is a single piece which is meant to

be swapped-out with the pre-existing plate shipped with Composite

Video panels. On NXD panels, the RGB connector opening is pre-drilled

into the I/O plate but can only be accessed by replacing the adhesive

cover and maintaining the existing overlay. When upgrading NXD panels

with this kit, don’t replace the NXD I/O plate, only the adhesive cover.

• NXA-RGBCBL, 15-pin to 5X BNC RGB Breakout cable (FG2250-80)

• NXA-RK17 Rackmount kit for 17" Wall Mount panels (FG2904-52)

• NXT-BP (FG2250-10)

• NXT-CHG (FG2250-50)

• PSN6.5 Power Supply (12 VDC) (FG423-41)

• Upgrade Compact Flash (factory programmed with firmware):

NXA-CFTPV256M - 256 MB V/VG compact flash card (FG2116-43)

NXA-CFTPV512M - 512 MB V/VG compact flash card (FG2116-44)

NXA-CFTPV1G - 1 GB V/VG compact flash card (FG2116-45)

1 2

Sommario

Pagina 1 - Multimedia Touch Panel (G4)

Quick Start GuideNXD & NXT-1700VG Multimedia Touch Panel (G4)For more detailed installation, configuration, programming, file transfer, and operat

Pagina 2 - Balanced OUT

Commenti su questo manuale

Nessun commento

AMX NXD-1700VG Manuale Utente

Navigare online o scaricare Manuale Utente per Telecomandi AMX NXD-1700VG. AMX NXT-1700VG RGB VG Series Table Top Touch Panel Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Telecomandi AMX NXD-1700VG